Description
Selleys RP7 is a multi-purpose lubricating and penetrating spray which displaces water and inhibits corrosion.
Features
- RP7 contains a penetrating lubricant oil that stops squeaks and loosens rusted parts.
- RP7 displaces moisture.
- RP7 protects all metals by providing a protective barrier against corrosive environments, including salt water and many chemicals.
- RP7 will not adversely affect rubber, paintwork or most plastics.
Available Sizes
- 150g can
Where can this product be used
- RP7 is suitable for household, automotive, marine, farm, industrial and building use.
- It helps to start wet motors, loosens rusted parts, lubricates, stops squeaks and protects against rust.
What materials is this product suitable for
- Metals
- Machinery
- Rusted parts
Handy tips
- Spray RP7 on seized or stiff joints, nuts, bolts etc. Allow 5 minutes to penetrate and if necessary tap lightly. Repeat application if needed in severe cases.
- Use RP7 as a general purpose lubricant eliminate squeaks and keep mechanisms functioning smoothly. Use the included straw for precise application.
- To start wet motors: (cars, boats, mowers, etc.) Remove distributor cap, wipe with a dry rag if soiled and then spray with RP7. Replace cap and spray around distributor cap, spark plugs, coil, generator, starter motor, leads etc.
- To clean grime and adhesive spray area with RP7, allow 60 seconds for the product to penetrate the grime and then wipe clean. Before use always do a spot test to avoid damage to surface.
Handy tips
- Spray RP7 on seized or stiff joints, nuts, bolts etc. Allow 5 minutes to penetrate and if necessary tap lightly. Repeat application if needed in severe cases.
- Use RP7 as a general purpose lubricant eliminate squeaks and keep mechanisms functioning smoothly. Use the included straw for precise application.
- To start wet motors: (cars, boats, mowers, etc.) Remove distributor cap, wipe with a dry rag if soiled and then spray with RP7. Replace cap and spray around distributor cap, spark plugs, coil, generator, starter motor, leads etc.
- To clean grime and adhesive spray area with RP7, allow 60 seconds for the product to penetrate the grime and then wipe clean. Before use always do a spot test to avoid damage to surface.
Safety tips
- Use only in well ventilated area
- Intentional misuse by deliberately concentrating and inhaling contents can be harmful or fatal.
