Description
Fast setting supa glue in a convenient bottle that allows easy, controlled and precise application.
Features
- Easy, controlled application
- Non-drip glue saver nozzle, reduces waste and mess.
- Long fine nozzle for precise application
- Bonds a variety of surfaces
- Extremely fast setting
- Dries Clear for clean, neat results
- Water resistant
- No clamping necessary
- No mixing required
- Maximum strength achieved in 12 hours
- Only takes 45 seconds to achieve initial bond
- Non-clog cap
- Forms a rigid bond
- Upright self-standing bottle
- Comfortable to hold
Available Sizes
- 3gm Bottle
Appearance
- Clear liquid dries to colourless film.
Where can this product be used?
- Ideal for small repair jobs or when immediate results are required.
- Water resistant not water proof, therefore not suitable for surfaces that will be continually wet
- Not suitable for bonding plastics such as Polypropylene and Polyethylene.
- Leather may become hardened or discoloured For interior use only
- Not suitable for repairing items that are in direct contact with hot liquids
- Will not permanently bond glass or materials containing alkaline elements.
- Has no gap filling properties therefore surfaces need to be a close fit
- Not recommended for highly porous surfaces
What materials is this product suitable for?
- Bonds a variety of porous and non-porous surfaces
- Metals
- China
- Rubber
- Leather
- Some plastics
- Wood
How to use this product
- Supa Glue works best when the surfaces to be bonded are close fitting.
- Surfaces to be bonded should be clean, dry and free of dust.
- Hold bottle in an upright position. Pierce seal by attaching nozzle and cap and turning clockwise.
- Remove cap and squeeze gently to apply a small amount of glue to one surface. Bring surfaces together and apply slight pressure. (30 seconds). The product grabs within 5-30 seconds, depending on environmental conditions and substrates to be bonded.
- Allow 30 minutes for sufficient bond strength for practical use. Maximum bond strength reached after 12 hours.
Handy tips
- Cyanoacrylate adhesives can create a white residue on the surface of a substrate if the area is not well ventilated.
- Clean the affected area with acetone to remove residue.
- For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
- Excellent when used with other adhesives, as the temporary tack
- For best results, ensure surfaces to be bonded are clean, free of dust, dry and close fitting
- In the event that fingers get stuck together don’t panic! Slowly twist fingers in opposite direction in hot soapy water.
- Acetone (nail polish remover) or Olive oil can also be used to remove Quick Fix from skin.
- While superglue is not recommended for use on some plastics, if your kids have broken their favourite toy, try this method: Line up the two pieces, glue it, leave it for 24hours to dry, then drop more glue on the break area like a collar/protective layer.
- Since Quick Fix cures with moisture set times may be extended on very dry surfaces or under dry conditions.
- Super glues cure more slowly when large amounts are used. For faster cure use sparingly.
